[Elecraft] K3 Spontaneous Failure

[Nr4c]

Yes

Pull the front panel and clean pins with Deoxit and reassemble. 

Sent from my iPhone
...nr4c. bill


> On Jun 6, 2020, at 10:13 AM, Jim McCook <w6ya at cox.net> wrote:
> 
> Thanks to those who responded with good suggestions.  This morning I turned it on and saw a different set of error codes, but there was audio.  Powered off and on and saw MAIN freq display, but SUB had disappeared.  More power off/on resulted in going back to normal operation.  It has been fine for the last hour.  Will try the re initialization if it fails again. It may be the pins on front panel as some have suggested.  I hesitate to pull off the front panel, but will talk to a friend who assembled his K3 about that.  73, Jim W6YA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com