[Elecraft] KPA500 Dead

[Bob McGraw K4TAX]

You say you checked the "fuse" and it is OK.   In fact, there are two 
fuses.  If either has failed the amp won't power on.   Then check the 
voltage at the outlet from where the amp is powered.

If you don't know where to start looking,.........if the above two items 
are OK, then I suggest sending an e-mail to tech support at Elecraft and 
ask for a RA.  Chances are the issue is beyond local repair, either by 
knowledge or test equipment and parts.

73

Bob, K4TAX


On 6/5/2020 11:04 AM, Tom Berry wrote:
> I was operating on FT8  20 meters for quite a long time with my KPA500 
> running about 400 watts and heard a few pops (like something 
> arching).  Heard it a few more times then the amp went off.
>
> Now it will not power on.  No lights, nothing.  I checked the fuse and 
> it is OK.
>
> Can you tell me where to start looking?
>
>
> Thanks
>
> Tom AAA4VV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net