[Elecraft] KPA500 Dead

[Alan - G4GNX]

With all due respect, if you don't know where to start looking, then 
please don't.

Unless you really know what you're doing, then you should not remove the 
lid. Fault finding could easily result in the need to power up and 
expose yourself to many hidden dangers.

It's been suggested that lack of AC power may be the cause. That should 
be a safe thing to check, without opening the KPA500.

Stay safe - send it back to Elecraft. :-)

73,

Alan. G4GNX


------ Original Message ------
From: "Tom Berry" <tberry1 at triad.rr.com>
To: elecraft at mailman.qth.net
Sent: 05/06/2020 17:04:41
Subject: [Elecraft] KPA500 Dead

>I was operating on FT8  20 meters for quite a long time with my KPA500 running about 400 watts and heard a few pops (like something arching).  Heard it a few more times then the amp went off.
>
>Now it will not power on.  No lights, nothing.  I checked the fuse and it is OK.
>
>Can you tell me where to start looking?
>
>
>Thanks
>
>Tom AAA4VV
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to g4gnx at g4gnx.com