[Elecraft] Self-fusing liquid electrical tape

[Ed Tanton]

I should have mentioned that. I strip 5 or 6 inches of insulation. That was 
why I cleaned the top of the ground rod and sprayed it with electrical 
lubricant. I used a stainless steel hose clamp to hold the stripped wires 
against the ground rod at each end of the stripped wire portions. The next 
part is what I wrote about to start with.
Ed Tanton
Marietta, GA


On 6/3/2020 10:31 PM, Ed Tanton wrote:

> I mention all this as a response to the question about the use of liquid
> tape.
> I did all this working on the ground rods and radials connected under my
> HyGain HyTower.

What do you use to attach the ground wire(s) to the ground rod?  Buckeyes?

73 de K2ASP - Phil Kane
Elecraft K2/100   s/n 5402

>From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n4xy at comcast.net