[Elecraft] FIXED--was NOT the feedline

[Dave Cole]

Yup.;..  :)

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources

On 6/4/20 8:47 AM, Bob McGraw K4TAX wrote:
> Weren't you taught not to whittle toward yourself and not to spit into 
> the wind?   Neither works.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> On 6/4/2020 9:59 AM, Dave Cole wrote:
>> I have that same problem, maybe 1 in 10 or 2,0 I slice the cable or my 
>> hand... ;)
>>
>> 73, and thanks,
>> Dave (NK7Z)
>> https://www.nk7z.net
>> ARRL Volunteer Examiner
>> ARRL Technical Specialist
>> ARRL Asst. Director, NW Division, Technical Resources
>>
>> On 6/4/20 7:44 AM, Peter Dougherty wrote:
>>> This is my default procedure, but every so often the knife slips when 
>>> I'm removing it and I end up slicing into the cable jacket itself. 
>>> Usually no big deal; cut it and pop on a new connector, but if it's 
>>> on the antenna end it's not so trivial.
>>>
>>>   - pjd
>>>
>>> -----Original Message-----
>>> From: elecraft-bounces at mailman.qth.net 
>>> <elecraft-bounces at mailman.qth.net> On Behalf Of Dave ColeI always use 
>>> Scotch 130, (self fusing tape), first, then Scotch 88.  I cut the 
>>> tape down the long axis, and it opes up like a peanut, leaving no 
>>> residue or old tape.
>>>
>>> 73, and thanks,
>>> Dave (NK7Z)
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net