[Elecraft] FIXED--was NOT the feedline

[Peter Dougherty]

This is my default procedure, but every so often the knife slips when I'm removing it and I end up slicing into the cable jacket itself. Usually no big deal; cut it and pop on a new connector, but if it's on the antenna end it's not so trivial. 

 - pjd

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Dave ColeI always use Scotch 130, (self fusing tape), first, then Scotch 88.  I cut the tape down the long axis, and it opes up like a peanut, leaving no residue or old tape.

73, and thanks,
Dave (NK7Z)