[Elecraft] [K3s] SteppIR Control

[John Simmons]

K3 won't do both RS232 and USB at the same time. You'll have to put a 
software shim in your PC to control the SteppIR.


-- 
73,
-de John NI0K
https://www.qrz.com/db/NI0K


John Reilly wrote on 7/31/2020 11:53 AM:
> I have a BigIR which won't connect to my K3 for frequency control It 
> worked prior to my move 10 months ago, but not now. I suspect a 
> setting problem. I use the K3 USB for rig control and audio, and 
> trying to use the RS232 RJ45 plug for the SteppIR. It appears the 
> SteppIR is not getting frequency information. How do I configure the 
> Config > RS232 to enable data to also go to the both USB and the RS232 
> port?
> Thanks,
>   - 73, John, N0TA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jasimmons at pinewooddata.com