[Elecraft] KPA1500 Alpha testers sought: Kenwood, Flex, Yaesu exciters

[rocketnj at gmail.com]

Hi Dick,

I would be interested in participating. Using a Flex 6700 via the KXUSB
cable from amp direct to USB port on radio. Set up to track the TX slice on
radio. Been working fine. Flex has a setting to auto poll.

I also have written a flow for Node Red to monitor and control the amp via a
web browser. Using the Ethernet IP connection and sending the ^ commands for
control and monitoring/info. Node Red runs on a Raspberry Pi on the network.


I will reply to you via direct email with my direct contact info.

73
Dave wo2x


-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Dick Dievendorff
Sent: Monday, July 27, 2020 7:05 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KPA1500 Alpha testers sought: Kenwood, Flex, Yaesu
exciters

I've made some recent changes to KPA1500 processing of transceiver frequency
messages from Kenwood, Flex, and Yaesu radios.  Icom CI-V is unchanged.

 

If you use one of these radios and use the KPA1500's XCVR SERIAL connection
to communicate the transceiver's frequency to the KPA1500, I'd appreciate
your help in testing a new version. If you generally use a logging program
to poll the radio and the KPA1500 is set up to observe the commands and
responses, that helps, too.

 

Thanks! 

 

73 de Dick, K6KR

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to rocketnj at gmail.com