[Elecraft] Radiosport MH-350ADJ with K2?

[Don Wilhelm]

Steve,

I am not familiar with that particular mic element, but --

If that is a dynamic mic element, no resistor should be used.
If it is an electret type, the normal 5.6k resistor should work fine, it 
is not critical - anything between 5.6k and 10k will do fine.

73,
Don W3FPR

On 7/26/2020 7:01 PM, Steve Dyer W1SRD via Elecraft wrote:
> Is anyone using this mic element with the K2? If so, what size resistor 
> did you use between MIC pin 1 and 6?