[Elecraft] K3S in QRP mode

[Nr4c]

It set it back to bare min CONFIG. Uninstalling all you installed options. You have on filter, no KPA3, no ATU, etc. download the kit assembly manual from Elecraft and go thru the Unstallation of each option. 

I don’t know why owners jump to a EEINIT to solve problems.  There are less distructive ways. Starting with restoring a saved good CONFIG file

And reloading latest firmware. 

Sent from my iPhone
...nr4c. bill


> On Jul 26, 2020, at 3:42 PM, Bill DeVore <maxrcul at gmail.com> wrote:
> 
> I recently did a Parameter Initialization on my K3S. I didn’t save the current firmware configuration as I’ve never done any custom programming on the radio.
> 
> After performing the initialization, a full rotation of the Power knob only goes from 0 to a maximum of 12 w on any band. Prior to the initialization of the rig, I could adjust power all the way to a max of 110w on each band.
> 
> Did the initialization set the rig in QRP mode? I sure hope there’s a configuration menu somewhere that I can change to get the radio back to full power.
> 
> Bill - W3PNM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com