[Elecraft] Using the KPA1500 with an ICOM IC-7300

Wed Jul 22 12:56:11 EDT 2020

Tom -

There is no "XCVR SERIAL HOST" setting in the 7300.

Are you perhaps referring to the "CI-V Transceive" setting?

73
Lyn, W0LEN

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom Whiteside
Sent: Wednesday, July 22, 2020 11:34 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Using the KPA1500 with an ICOM IC-7300

Thanks for all the helpful suggestions  - particularly from Dick K6KR and
Rob from Elecraft Technical support.  The KPA1500 tracking an IC-7300 issue
has been solved!  The trick was making sure XCVR SERIAL HOST is disabled.

73,

Tom N5TW

Message: 19
Date: Tue, 21 Jul 2020 17:16:32 -0500
From: "Tom Whiteside" <tomw at ecpi.com>
To: <elecraft at mailman.qth.net>
Subject: [Elecraft] Using the KPA1500 with an ICOM IC-7300
Message-ID: <[email protected]>
Content-Type: text/plain;	charset="us-ascii"

My early vintage K3 headed back to Elecraft for repairs this week and I'm
trying to get my ICOM IC-7300 to fully interface with the KPA1500.   I have
followed the instructions Elecraft includes in the manual plus a great video
from WX0V - I can key the amp just fine but the amplifier is not tracking
band changes by the IC-7300.    I have the stereo cable going between the
KPA-1500 XCVR Serial and the IC-7300 CI-V Remote control jack and the
KPA1500 key-in RCA plug connected to the IC-7300 send control jack.

On the KPA1500, I have the Serial Speed host set to 19200bps and the Serial
Speed XCVR also set to 19200.   Not sure what the Serial Speed Host is for -
it is not mentioned in the instructions for the IC-7300.  Radio Type is
ICOM.  On the IC-7300, the CI-V USB baud rate is also set for 19200, CI-V
Transceive is on and the CI-V Output is on.

I have tried other baud rates.   Anyone have any ideas?  Thanks!

Tom N5TW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lyn at lnainc.com 