[Elecraft] K-POD Coiled Cord?

[Nr4c]

TNX

Sent from my iPhone
...nr4c. bill


> On Jul 17, 2020, at 10:08 AM, Dick Dievendorff <dick at elecraft.com> wrote:
> 
> My K-Pod, an early one, has a rear-panel USB-B connector labeled "USB", used to install K-Pod firmware and also for a K4 connection. K-Pod DC power is also provided through this cable.
> 
> I use a very standard USB A to B cable.
> 
> 73 de Dick, K6KR
> 
> -----Original Message-----
> From: Nr4c <nr4c at widomaker.com> 
> Sent: Friday, July 17, 2020 01:43
> To: Dick Dievendorff <dick at elecraft.com>
> Cc: Eric Norris <norrislawfirm2 at gmail.com>; elecraft at mailman qth. net <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K-POD Coiled Cord?
> 
> It will fit our existing K-Pods??
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Jul 16, 2020, at 11:56 PM, Dick Dievendorff <dick at elecraft.com> wrote:
>> 
>> The K4 uses a USB cable to the K-Pod rather than the telephone like cable used with K3.  There are USB-A jacks on K4 front and back, not underneath like the K3.
>> 
>> 73 de Dick, K6KR
>> 
>>> On Jul 16, 2020, at 20:41, Eric Norris <norrislawfirm2 at gm  Sorry, I 
>>> mean not the USB cord, but the telephone-cable-like cord that goes under the right front on the K3, and I assume K4.
>>> 
>>> 73 Eric WD6DBM
>>> 
>>>>> On Thu, Jul 16, 2020, 8:00 PM Dick Dievendorff <dick at elecraft.com> wrote:
>>>> It’s a standard USB-A to USB-B cable from K4 to K-Pod. I’m not sure about coiled...
>>>> 
>>>> 73 de Dick, K6KR
>>>> 
>>>>> On Jul 16, 2020, at 19:50, Eric Norris <norrislawfirm2 at gmail.com> wrote:
>>>>> 
>>>>> Has anyone found a high-quality coiled cord to replace the K-POD 
>>>>> to K4 cord?  Is there a length/type restriction?
>>>>> 
>>>>> 73 Eric WD6DBM
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>> 
>>>>> This list hosted by: http://www.qsl.net Please help support this 
>>>>> email list: http://www.qsl.net/donate.html Message delivered to 
>>>>> dick at elecraft.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this email 
>> list: http://www.qsl.net/donate.html Message delivered to 
>> nr4c at widomaker.com
>