[Elecraft] Waterproof SO-239 covers

[Mike Harris]

I must say that over many years and without any ill effect I've never 
bought into this idea of Gorilering up a PL259 with pliers beyond finger 
tight. A quarter of a turn is an unbelievable suggestion. I've just 
tried it and a couple of degrees is the best I could do without being 
brutal and even then I don't thing it would go any further.

Urban myth maybe?

Also, I've never had a failure after simply applying a generous wrap of 
self amalgamating tape, nothing else, to waterproof coax connectors. Our 
UV environment is pretty powerful, clear skies and sunshine can turn the 
skin on my head into huge dandruff seven days later after 30 minutes 
exposure.

Regards,

Mike VP8NO

On 16/07/2020 12:21, Phil Kane wrote:
> On 7/15/2020 6:50 PM, Drew AF2Z wrote:
> 
>> I would use Coax Seal. Same idea as duct seal but it's more pliable,
>> more wx resistant and a little stickier. It will last forever, never
>> hardens and can be peeled off when needed. Might want to screw pl-259
>> shells onto the socket threads first, then seal them. The sockets &
>> shells will be pristine when you go to use them.
> 
> Don't forget to tighten the connector 1/4 turn after "finger tight" with
> a pair of pliers to make a real seal.
> 
> 73 de K2ASP - Phil Kane
> Elecraft K2/100   s/n 5402
> 
>>From a Clearing in the Silicon Forest
> Beaverton (Washington County) Oregon
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mike.harris at horizon.co.fk
>