[Elecraft] K3S, VOX and WSJT-X?

[Don Wilhelm]

Frank,

Although several others have had success with VOX, I find the most 
reliable is to use PTT via CAT command.  Set it in the application and 
you will have no problem.

If your problem is related to audio levels, refer to my website 
www.w3fpr.com.  Scroll the left column to the last article and click to 
open the page.  No matter whether you are operating from the transverter 
mode or the normal antenna, you must have 4 bars solid with the 5th bar 
flashing on the ALC meter.

73,
Don W3FPR

On 1/29/2020 9:35 PM, Frank O'Donnell wrote:
> Bob,
> 
> First, let me back up and say that I'm operating with the K3S in 
> transverter mode on 630m with an external power amp. I've successfully 
> used CAT control with WSJT-X on a MacBook Pro to tx/rx JT9 and WSPR. My 
> objective now is to use the K3S in VOX mode with a Windows 10 desktop 
> running two instances of WSJT-X,