[Elecraft] KPA500 reduced recieve signal

[Bob McGraw K4TAX]

Is your receive bandwidth changing between modes?  I wouldn't think 
changing the amp would affect the receiver.   I'd say a more careful 
evaluation would determine the T/R switch in the amp is the culprit.

73

Bob, K4TAX

On 1/28/2020 6:46 PM, Harry W4HWD wrote:
> When I switch the amplifier from Standby to Operate, I see and hear a
> noticeable reduction in received signal strength, both on the S-meter and in
> my headphones. Signal strength goes back up when I switch from Operate back
> to Standby. *Seems to only do it in DATA A mode*. No change on CW. Any ideas
> why? Rig is a K3S, using enhanced mode cables, if that matters.
>
> Harry W4HWD
>
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>