[Elecraft] K3S, VOX and WSJT-X?

[Barry]

Frank,
     I use VOX for all of my digital operation to include AFSK, FT8, and 
FT4. I really haven't done anything to the default setting that came 
with the radio. I just set the line in to 20 and adjust the power slider 
in WSJT-X to get the 4 bars with 5th flickering on the K3s's ALC 
readout. Nothing fancy! One caution: watch your PA temperature. It will 
definitely rise.

73,
Barry
K3NDM

------ Original Message ------
From: "Frank O'Donnell" <vfo77 at inkbox.net>
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: 1/28/2020 1:22:43 AM
Subject: [Elecraft] K3S, VOX and WSJT-X?

>I've successfully used WSJT-X with my K3S for a fairly long time, using a single USB cable for both audio transfer and CAT control.
>
>Currently I'm interested in trying VOX in order to enable running multiple instances of WSJT-X simultaneously on the same band (JT9 and WSPR on 474.2 kHz, if it's of any interest). Could anyone who is using VOX for WSJT-X with a K3/K3S tell me how they have the Settings > Radio pane in WSJT-X configured? I can probably stumble my way through, but some pointers would undoubtedly make faster progress.
>
>Thanks and 73,
>
>Frank K6FOD
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3ndm at comcast.net