[Elecraft] VFO B dead

[Victor Rosenthal]

...and the first thing to check is that one of them hasn't come unplugged!

73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/

On 27/01/2020 6:38, Nr4c wrote:
 > Download the K3 Assembly Manual. I believe they just plug in.
 >
 > Sent from my iPhone
 > ...nr4c. bill
 >
 >
 >> On Jan 26, 2020, at 10:50 PM, Gary K9GS <k9gs at gjschwartz.com> wrote:
 >>
 >> Hello Don,How difficult is it to replace the encoders?  Is there a 
document that describes the procedure?73,Gary K9GS

 >> -------- Original message --------From: Don Wilhelm 
<donwilh at embarqmail.com> Date: 1/26/20  8:15 PM  (GMT-06:00) To: Gary 
K9GS <k9gs at gjschwartz.com>, Elecraft at mailman.qth.net Subject: Re: 
[Elecraft] VFO B dead Gary,If you are not afraid of disassembling your 
K3, remove the Front Panel assembly and swap the encoder A with encoder 
B.  If the problem follows the encoder, then order a new encoder from 
Elecraft.  If that is not the problem, contact support at elecraft.com for 
additional checks.73,Don W3FPR