[Elecraft] Update: K3 Hard of Hearing
Nr4c
nr4c at widomaker.com
Wed Jan 22 05:06:24 EST 2020
I think that time was several days ago!
Sent from my iPhone
...nr4c. bill
> On Jan 22, 2020, at 1:36 AM, Jack Brindle via Elecraft <Elecraft at mailman.qth.net> wrote:
>
> John;
>
> It sounds like it is time to call tech support to see if they can help. They are pretty good at figuring out what happened and how to fix it.
> Trying the second K3 in its place, and it works fine, tells me that you may have an issue in the front end. But they will know better.
> Good luck getting it working properly!
>
> 73!
> Jack, W6FB
>
>
>> On Jan 21, 2020, at 5:02 PM, John Unger <w4au.john at gmail.com> wrote:
>>
>> Transmit works fine, Martin.
>>
>>> On Tue, Jan 21, 2020 at 7:46 PM Martin Sole <hs0zed at gmail.com> wrote:
>>>
>>> Is the transmit working okay?
>>>
>>> Don’t recall if you mentioned before.
>>>
>>> My early K3 suffered 0.1uf capacitor failure causing loss of injection
>>> which affected both tx and rx. Another cap failure caused loss of tx only
>>> due to shorted switching voltage. Both were on the RefOsc board.
>>>
>>>
>>>
>>> Sent from my iPhone
>>>
>>>> On 22 Jan 2020, at 02:42, John Unger <w4au.john at gmail.com> wrote:
>>>>
>>>> Wow, guys, thank you all for the suggestions of things to check, but
>>> still
>>>> no joy...
>>>>
>>>> Here's your suggestions that I have checked:
>>>> voltage - 13.6
>>>> RX ANT not on
>>>> I uploaded a couple of old config files - not change
>>>> Turning RF GAIN fully CCW puts SWR meter at full scale
>>>> My other K3 hears FB on all the antennas
>>>> This K3 doesn't have an ATU
>>>> Switching an antenna in and out makes no apparent difference in received
>>>> signals
>>>> No change in BP filters; they have been working fine for long time.
>>>>
>>>> I do operate SO2R. The last time radio was working OK was during the NAQP
>>>> CW contest where I was running 100W. I have operated KW amps in the past
>>> on
>>>> each radio without any front end problems (but there's always the first
>>>> time, right?).
>>>>
>>>> Thanks again for the help
>>>>
>>>> 73 - John, W4AU
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to hs0zed at gmail.com
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jackbrindle at me.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com
More information about the Elecraft
mailing list