[Elecraft] K3....s Raspberry Pi 4 B

[Bob McGraw K4TAX]

I’ve always used CAT control for PTT with 100% success with all of my software applications.    That way I can switch between SSB and Data and find it not necessary to make any radio adjustments. 

Bob, K4TAX


Sent from my iPhone

> On Jan 20, 2020, at 2:41 PM, Wes <wes_n7ws at triconet.org> wrote:
> 
> So have I, perhaps even longer.  The only downside with Elecraft radios is that VOX audio sampling follows the mic/line gain setting and is of course affected by them.  Without judicious setting of digital mode line level/sound card level/WSJT "power level" settings, there is a nonsensical need to readjust VOX gain when changing modes.  A request to remember VOX gain between modes has always fallen on deaf ears. With the K4 now the focus, this will never happen.
> 
> Wes  N7WS
> 
> 
>> On 1/20/2020 11:45 AM, Jim Brown wrote:
>> 
>> VOX is a perfectly good way to key the radio. I've used nothing but VOX for SSB, RTTY, and WSJT modes for at least 15 years.
>> 
>> 73, Jim K9YC
>> ______________________________________________________________ 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net