[Elecraft] [Elecraft-K3] K3s throwing a "HIGH CURR" error after installing K144XV and Reference Phase Lock Option

[Don Wilhelm]

Clay,

Have you measured the voltage displayed by the K3S during transmit?  A 
low voltage is a common cause for Hi Curr.
Reduce the voltage drop in the power cord by running directly from the 
power supply (no DC distribution boxes) and make certain all connections 
are tight.

73,
Don W3FPR

On 1/12/2020 6:11 AM, Clay Autery wrote:
> OK... so NONE of that worked...  So, I reinstalled everything and 
> checked it 3 times...
> 
> Here is something....
> 
> What should the voltage be on Pin #1 of P95 (XV12DC) be with respect to 
> chassis?
> 
> I am reading 13.75 VDC
>