[Elecraft] [K3] Issue with HI CUR on 12m
Nr4c
nr4c at widomaker.com
Sat Jan 11 19:13:33 EST 2020
Check antenna.
Also, check into dummy load and report back.
Sent from my iPhone
...nr4c. bill
> On Jan 11, 2020, at 11:45 AM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
>
> Is the power supply at 14 volts or so? And what does the radio show the voltage to be in key down transmit into a dummy load. Low voltage will demand more current to produce 100 watts.
>
> I run my supply at 14.25 V no load and the radio shows 13.8V during 100 watts transmit. Voltage drop should be 0.5 volts or less.
>
> Bob, K4TAX
>
>
> Sent from my iPhone
>
>> On Jan 11, 2020, at 10:31 AM, Bill Coleman <aa4lr at arrl.net> wrote:
>>
>> Back in early December, I installed two KSYN3As in my K3 SN 7071. Sometime after that, I noticed that on 12m, I’m seeing a HI CUR indication when I set the power level to more than about 80-85 watts. The K3 will back off on the power level, then slowly ramp back up until it hits HI CUR again.
>>
>> I don’t remember seeing this before. After the KSYNC3A install, I ran the transmit gain calibration at both 5 and 50 watts, as specified in the instructions. Just in case something went awry, I ran it again.
>>
>> I’m still seeing this problem. What causes HI CUR at 85 watts? The K3 ought to be able to produce over 110 watts on 12m.
>>
>> I’m not seeing this issue on other bands.
>>
>> No issues with calibration
>> Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr at arrl.net
>> Web: http://boringhamradiopart.blogspot.com
>> Quote: "Not within a thousand years will man ever fly!"
>> -- Wilbur Wright, 1901
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com
More information about the Elecraft
mailing list