[Elecraft] OT: Speaker Wire Recommendations?
donovanf at starpower.net
donovanf at starpower.net
Fri Jan 10 11:12:34 EST 2020
Clay,
You'll get more meaningful feedback if you move this RFI discussion
to the RFI reflector. The Elecraft reflector is the wrong place for it.
https://www.contesting.com/FAQ/rfi
If you're using passive speakers as you implied in your email, a ferrite core
at each speaker connection to your amplifier should do the trick.
Suggest you disconnect all five speakers and reconnect them and
work on them one at a time
This is an excellent resource:
www.audiosystemsgroup.com/RFI-Ham.pdf
73
Frank
W3LPL
----- Original Message -----
From: "Clay Autery" <KY5G at montac.com>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Friday, January 10, 2020 8:09:54 AM
Subject: [Elecraft] OT: Speaker Wire Recommendations?
OK... so I am knee deep in assembling and installing a subRX, et al.,
but got reminded by the XYL that I STILL have not addressed the signal
bleed into the audio system via the long runs of parallel conductor
speaker wires in the HT setup.
In order to maintain a high "SAF" (Spouse Acceptance Factor), I need to
deal with this issue WHILE I am in the attic re-configuring the network
and routing various shack related wiring.
I cannot imagine a stellar group of operators as are gathered here have
not had to deal with this before. <grin> I am hoping that replacing
the speaker wire with either simple twisted pair (or shielded, twisted
pair, w/shield properly terminated) will mitigate the hits the HT system
is taking.
*Q: Do any of y'all have recommendations for a particular wire stock
for use in this application?* Small system... only about 50W per
channel on the 5 main speakers, so they don't have to be monster-sized
conductors. I considered using CAT-5(+) wire and bonding all 4 pair to
a single loop, but I don't think a single run would be enough copper
(?), and I don't want to make multiple runs per driver.
*Any ideas?*
73,
--
______________________
Clay Autery, KY5G
(318) 518-1389
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donovanf at starpower.net
More information about the Elecraft
mailing list