[Elecraft] RSP-1A as panadapter

[Bob McGraw K4TAX]

If either the IF Output or the split approach with RX ANT IN and OUT is 
used, the ports are protected during transmit.   However, some of the 
SDR receivers are in plastic / unshielded boxes and themselves may not 
be adequately immune to RF.    If one is concerned, it might be wise to 
attempt to line the inside of the case with foil tape or enclose the 
receiver in a suitable metal box {the way it should have been in the 
first place}.

73

Bob, K4TAX


On 1/5/2020 8:40 PM, AL7CR wrote:

> I used an SDR-IQ connected directly to the IF out for many years with no problems whatever.
>
> On Sun, Jan 5, 2020, at 2:29 PM, weaverwf wrote:
>> For those of you using an SDRplay as a panadapter with the K3S, what RF
>> protection do you use for the SDRplay?thanks and 73,Bill WE5PSent using
>> rock and chisel
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to al7cr at mooseaviation.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net