[Elecraft] MMTTY issue

[Nr4c]

When in the Data mode you are using, press the SPOT/Pitch button (lower-left of the keypad) and hold. It should show the Mark freq. adjust to suit. 

Sent from my iPhone
...nr4c. bill


> On Feb 28, 2020, at 9:25 PM, David Smith <dlsmith at harlanonline.net> wrote:
> 
> I am running to 2 K3 radios  for SO2R and having an issue with MMTTY Mark settings (running the programs with N1MM+).   On one K3, I have the MMTTY Mark setting for 2125 and in the Engine window I am receiving the signal just fine, but on the 2nd MMTTY, there is so signal on the Engine window when I set the Mark for 2125.  I have to go down to the Mark setting of 915 to receive the signal (as I go down from the Mark settings of 2125 to 915 the signal comes from the left side until centered).
> 
> My setup:
> 
> 1. I am running 2 external soundcards (Xonar) and have changed them back and forth between the 2 radios and get the same problem no matter which soundcard I use.
> 2. Have same problem no matter which filter I use (2.7 – 2.1 – 400)
> 3. DSP off
> 4. Filter controls are set identical
> 5. Data mode on both K3 are set to 45 baud AFSK.
> 6. MMTTY settings are identical  in their configuration.
> 7. N1MM+ configured to AFSK when MMTTY are launched.
> 
> All works fine in receive and transmitting when making contacts, just have the issue with setting the Mark being different on the MMTTYs.  
> 
> Just wondering if their might be a K3 Config difference between the 2 I might be missing.
> 
> Any comments as to why I might be having to set the Mark different on MMTTY (2125 versus 915) to receive the signal to decode for the 2 K3 radios.
> 
> Thanks – David - ND4Y
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com