[Elecraft] K4 on AM

[W2xj]

am should go to at least 6 KHz or be totally unrestricted. 

Sent from my iPad

> On Feb 28, 2020, at 7:27 PM, Wayne Burdick <n6kr at elecraft.com> wrote:
> 
> Hi Grant,
> 
> The K4 will allow independent setting of TX bandwidth for voice and audio data modes up to something in excess of 4 kHz. SSB, ESSB, AM, and audio data will each have their own setting.
> 
> As with the K3S, it'll be up to the user to judge whether the use of wider bandwidths is acceptable under the given operating conditions. This subject will be discussed in the owner's manual.
> 
> Wayne
> N6KR
> 
> 
>> On Feb 28, 2020, at 1:48 PM, Grant Youngman <ghyoungman at gmail.com> wrote:
>> 
>> One key spec we haven’t heard anything about yet is the transmit bandwidth capability of the K4 on AM.  I certainly hope the design options substantially exceed the rather poor and restricted transmit bandwidth of the K3, and that there aren’t any unnecessary artificial “political” restrictions.  It would seem that the K4, like the Flex radios for example, should be capable of providing outstanding, clean, AM transmit performance with adjustable transmit audio bandwidth to suit conditions, etc.
>> 
>> Grant NQ5T
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w2xj at w2xj.net