[Elecraft] What softwares are available for Point-and-Click SDR/K3 control?

[N4ZR]

N1MM Logger has a built in Spectrum Display that controls a number of 
SDRs, connected either to your IF or to the RX Ant In/Out loop with a 
splitter, as well as your K3.  Added feature is that it will display 
spots as they come in, associated with the peak on the display.  See 
https://n1mmwp.hamdocs.com/manual-windows/spectrum-display-window/

73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 2/17/2020 8:17 AM, bw_dw at fastmail.fm wrote:
> Hi all,
> I'm wondering what software solutions are available to provide an SDR band display, which incorporates Point-and-Click functionality that controls both the SDR and the K3 frequency?
>
> In other words, identifying a signal on an SDR display and the action of clicking on that signal moves both the SDR and the K3 frequency to it.
>
> I'm hoping there is one single software solution that incorporates both features requiring only one single USB interconnect into the PC.
>
> Thanks
> Duane
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4zr at comcast.net