[Elecraft] K3: Macro to make radio beep...

[Wayne Burdick]

The K4 has audio tone generation commands. 

Wayne

----
elecraft.com

> On Feb 15, 2020, at 2:12 PM, Andy Durbin <a.durbin at msn.com> wrote:
> 
> Good to know I wasn't the only one wanting to do this.  In my case I wanted to make my TS-590S beep if power was manually set above my controller's programmed band max power limit.  I force the power setting back to max and beep.  It was hard to find a way to make the TS-590S beep but I eventually found a CAT command that would beep but change nothing, AN999;.
> 
> If a rig has high and low tones for signalling to the operator it's unfortunate that there is not a CAT command dedicated to sounding those beeps.  Perhaps something to consider for the K4?
> 
> 73,
> Andy, k3wyc
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com