[Elecraft] QRO - KPA500 Failure

[Michael Walker]

Amps making noises like that usually mean you have to take the covers off.

They are easy enough to repair if you are so inclined.  If not, then you
will need to contact Elecraft support and odds are you will have to send it
home for a Spa day.

Mike va3mw


On Thu, Feb 6, 2020 at 3:35 PM Jim Brown <jim at audiosystemsgroup.com> wrote:

> On 2/6/2020 12:15 PM, Jim Mullen wrote:
> > Any pointers of where to start looking?
>
> 1) What SWR does the rig see with the amp off?
> 2) Make notes of any error messages given by the KPA500 display.
> 3) Call Elecraft Support
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net
>