[Elecraft] VFO B dead

[Gary K9GS]

Thank you Alex, good to know the raw encoder PN.73,Gary K9GS
-------- Original message --------From: Alex Malyava <alex.k2bb at gmail.com> Date: 2/6/20  12:02 PM  (GMT-06:00) To: K9MA <k9ma at sdellington.us> Cc: elecraft at mailman.qth.net Subject: Re: [Elecraft] VFO B dead The encoder itself, if you want to re-solder it, isBourns Inc.ENS1D-B28-L00100Lcost is about $58 in DigiKey and $45 in MouserOn Thu, Feb 6, 2020 at 11:57 AM K9MA <k9ma at sdellington.us> wrote:> On 2/6/2020 10:03, Gary K9GS wrote:> > Hi All,I finally found some time this morning to take apart my> K3.Removing the front panel was relatively easy.  I swapped the VFO A and> VFO B encoders and I did have a defective VFO B encoder .I've ordered a> replacement encoder from Elecraft,  $60 plus shipping. 73,Gary K9GS>> I haven't had any failures, but a while ago I ordered some spare> encoders and pots for my K3, just in case they aren't available in the> future.>> 73,>> Scott K9MA>> --> Scott  K9MA>> k9ma at sdellington.us>> ______________________________________________________________> Elecraft mailing list> Home: http://mailman.qth.net/mailman/listinfo/elecraft> Help: http://mailman.qth.net/mmfaq.htm> Post: mailto:Elecraft at mailman.qth.net>> This list hosted by: http://www.qsl.net> Please help support this email list: http://www.qsl.net/donate.html> Message delivered to alex.k2bb at gmail.com______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to k9gs at gjschwartz.com