[Elecraft] K3S - Fldigi - macMini
Charles Hardt
charles.hardt at mgccc.edu
Tue Dec 29 14:57:15 EST 2020
Are you using FLRIG or HAMLIB for rig control? I and from what I understand others have problems with FLRIG. But quite different from your problem, FLRIG continuously sets transmit on my KX3. I suggest you try HAMLIB for rig control. I know it is not as full featured as FLRIG, but appears to be a lot more stable. Yes I know there is a lot of difference in the interface between the KX3 and your K3s. I use a signalink for my audio CODEC and your K3s has it built in. If you are receiving audio then you probably have FLDIGI pointed to the proper sound CODEC. As long as you have selected both for transmit and recieve. Make sure your rig control software in FLDIGI is set up properly to control PTT. I might suggest reviewing NBEMS videos on youtube. They go through in depth detail for setup. I am on my phone, I will later send you the URL for YouTube videos, when I get on my computer. The setup can be a little overwhelming. I use the videos as I go through every setup. Not to say I don't have setup problems, but those videos have solved all my problems. Good Luck and let me know how it works out. 73, Charlie, N2PKW
Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone
-------- Original message --------
From: wb0m at flashdog.us
Date: 12/28/2020 9:04 PM (GMT-06:00)
To: elecraft at mailman.qth.net
Subject: [EXT]: [Elecraft] K3S - Fldigi - macMini
Greetings Everyone & HNY,
I am having problems setting up Fldigi with a new macMini & my K3S. I receives signals, but I cannot transmit. I have no problems using WSJT-X.
Any help, on or off list, would be most appreciated.
73,
Jeff/wb0m
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to charles.hardt at mgccc.edu
More information about the Elecraft
mailing list