[Elecraft] K3 Sub Receiver

[Ken K6MR]

You are reading an old description of the SUB button.  A firmware change made the long press of SUB the activation of Diversity.  Linking is done through the config menu.

Ken K6MR

From: John Lemay<mailto:john at carltonhouse.eclipse.co.uk>
Sent: Saturday, December 26, 2020 09:13
To: Elecraft Reflector Reflector<mailto:elecraft at mailman.qth.net>
Subject: [Elecraft] K3 Sub Receiver

Hello all

I have a K3 with the sub-receiver installed, and working. But .........

The handbook says < Holding SUB links the VFOs (whether the sub
receiver is on or off). The kHz decimal point of
VFO B flashes as a reminder. VFO A is the master,
moving both VFOs in tandem. >

I cannot get this to work. I can get the sub rx to be on or off (by tapping
SUB), and I can get Diversity to work as well (with a long hold of SUB).

What other settings can there be on the radio that make it impossible to
select moving both VFO's in tandem ? - which is exactly what I want.

Thanks, and seasons greetings !

John G4ZTR



--
This email has been checked for viruses by AVG.
https://www.avg.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6mr at outlook.com