[Elecraft] T1 Tuner green/yellow flashing LEDs
James Bennett
w6jhb at me.com
Tue Dec 15 15:50:12 EST 2020
Craig - I built one about two months ago and it’s working fine.
On mine, to go to bypass, I quickly press the PWR button, then the BYP button. Doing so alternates back and forth between bypass and not. After doing that one-two press combo, the yellow will light up for a second or two if you are in bypass and the green will light up if you are in tune/operate. Note that the label set “tap”.
The yellow will light up if you press PWR and then do nothing within two seconds or so. I believe that it is telling you the last forward power level.
Does that help?
Jim / W6JHB
> On Dec 15, 2020, at 11:42 AM, Craig Vonilten <ic897d at gmail.com> wrote:
>
> I just finished building my T1 kit. As with their other gear, top notch
> instructions and quality. A very solid design. Power up and test all
> appear to be functional, although I've not tuned any radials yet, since I
> wanted to step through the testing. Everything appears nominal including
> the inductor testing. However, when I tested the bypass (IN/OUT) feature,
> the green/yellow LEDs rapidly flash (alternating pattern). Pressing (and
> holding) the BYP button will hold one or the other LEDs, with the pattern
> starting as soon as the button is released. No other button combination
> seems to stop or correct this condition. I expected to be able to press BYP
> to select IN or OUT and have a steady green or steady yellow (indicating the
> bypass condition). I have to remove the battery to reset the tuner and
> recover from this flashing LED condition. As stated, I have not tuned a
> load yet. Is this normal?
>
>
>
> Craig
>
> N6CAV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6jhb at me.com
More information about the Elecraft
mailing list