[Elecraft] [K3] Locking VFO B

[Ken K6MR]

Dunno.  Works here.

Ken K6MR

From: Victor Rosenthal 4X6GP<mailto:k2vco.vic at gmail.com>
Sent: Sunday, December 13, 2020 19:33
To: Ken K6MR<mailto:k6mr at outlook.com>; Elecraft Reflector<mailto:elecraft at mailman.qth.net>
Subject: Re: [Elecraft] [K3] Locking VFO B

Still doesn't work!
When I turn off diversity or the subrx or split, it says "N/A".
Maybe I'm dreaming, but it seems that I once did this.

73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 13-Dec-2020 20:14, Ken K6MR wrote:
> Yep, looks like that’s either a bug or a feature.  When in diversity
> mode and BSET using LOCK gives the same response as RX ANT.  Maybe what
> it’s trying to say is that you can’t lock B because it is already
> “locked” to VFO A .
>
> Ken K6MR
>
> *From: *Victor Rosenthal 4X6GP <mailto:k2vco.vic at gmail.com>
> *Sent: *Sunday, December 13, 2020 04:45
> *To: *Ken K6MR <mailto:k6mr at outlook.com>; Elecraft Reflector
> <mailto:elecraft at mailman.qth.net>
> *Subject: *Re: [Elecraft] [K3] Locking VFO B
>
> That's what I thought. But I got a response like this: [MAIN], and it
> didn't do anything.
>
> Maybe the fact that I was in diversity at the time had something to do
> with it. I'll turn off diversity and try it again.
>
> 73,
> Victor, 4X6GP
> Rehovot, Israel
> CWops #5
> Formerly K2VCO
> https://www.qsl.net/k2vco/ <https://www.qsl.net/k2vco/>
> On 13/12/2020 6:27, Ken K6MR wrote:
>  > Long press A/B (BSET) and then long press RATE (Lock)
>  >
>  > Ken K6MR
>  >
>  > *From: *Victor Rosenthal 4X6GP <mailto:k2vco.vic at gmail.com
> <mailto:k2vco.vic at gmail.com>>
>  > *Sent: *Saturday, December 12, 2020 20:24
>  > *To: *Elecraft Reflector <mailto:elecraft at mailman.qth.net
> <mailto:elecraft at mailman.qth.net>>
>  > *Subject: *[Elecraft] [K3] Locking VFO B
>  >
>  > I seem to recall that there was a way to lock the K3's VFO B without
>  > locking VFO A. Am I imagining this, or is it possible?
>