[Elecraft] No longer shows SWR/RF, Keyer/Mic does not help

[Adrian]

ALC indication in externally modulated data mode is essential to setting 
the mic gain

to a 4 bar > 5th bar flashing alc level for best data comms.



On 13/12/20 9:25 am, Jim Rhodes wrote:
> Actually you can be in "Data A" or "AFSK" but not in the internally
> generated data modes. Data A is basically USB with no audio processing and
> AFSK is the same but LSB. So check your data mode if you  are in data. ALC
> is not needed for the other 2 settings because they are generated
> internally to the KX3.
>
> On Sat, Dec 12, 2020 at 1:06 PM Grant Youngman <ghyoungman at gmail.com> wrote:
>
>> Press (not press-hold) CMP.  The will change the display between SWR/RF
>> and CMP/ALC.  You must be in SSB (or AM)  mode, not CW, FM, or DATA.
>>
>> Se the manual, on page 15.
>>
>> Grant NQ5T
>>
>>
>>
>>> On Dec 12, 2020, at 1:44 PM, Greg Herman <kc9nro at gmail.com> wrote:
>>>
>>> Still can not get SWR/RF meter to display. Stuck on CMP ALC
>>>
>>> YouTube video is exactly what I have attempted  my toggle between mic and
>>> cq speed looks a little different than video.
>>>
>>> Any menu setting that might have gotten switched?
>>>
>>> 73
>>> Greg. KC9NRO
>>> --
>>> Have a Great day!
>>> Greg
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jimk0xu at gmail.com
>>
>