[Elecraft] K3 FT8

[Jim Rhodes]

Personally (and this varies with every setup) I usually run with the sound
card output level about 1/3 of the way, the level in WSJT-X about 1/3 of
the way up then adjust the mic (line-in) to get the 4 bars plus a flicker
level on the ALC meter. You do not want any of the levels to be too near
either end of the scale for best linearity. So my mic level usually ends up
at 20 to 30.


On Fri, Dec 11, 2020, 13:11 Joe K2UF <joe at k2uf.com> wrote:

> I am trying to get FT8 running on my K3 using Rig blaster advantage.
> Everything works except no  transmit RF output.
>
> Enable TX puts K3 into transmit but no RFoutput.  Have tried adjusting RBA
> xmit level and K3 mic output.  No joy.
>
> .Anyone able to share their PTT settings.
>
> Thanks,
>
> Joe K2UF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>