[Elecraft] K4 Reports

[Dick Dievendorff]

The K4 has three USB A connectors, two on the rear and one on the front panel.  The K-Pod can be connected to any of these using a standard USB-A to USB-B cable.  The K-Pod is powered through this cable. Eric has tested three K-Pods concurrently, and they can be connected through an external hub if desired.

The RJ connector is unused.

73 de Dick, K6KR

> On Dec 3, 2020, at 08:01, ke9uw <c-hawley at illinois.edu> wrote:
> 
> I have a question. How do you plug an early K Pod into a K4. Is there an RJ
> plug to USB adapter and where/which USB socket do you plug it into on the
> K4.
> 
> 
> 
> -----
> Chuck, KE9UW
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com