[Elecraft] W2 wattmeter

[Joseph McIntire]

My wattmeter  seems to be displaying  the wrong SWR on the LEDs. I bought a digital display unit on line. The radio has an internal ATU. The radio says tuned 1.0 - 1. when I key the radio says 1.0 - 1 and the DDU says .16 SWR but the LEDs show 1.5 - 1. So if I hit 1.2 - 1 the LEDs all flash so I can not tell at a glance if the SWR is good. So I was wondering if any one had seen this or know  if it can be  fixed without sending it in. I already  replaced the coupler do to i thought that was the problem.

         Joe
         AB3JN

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android<https://aka.ms/ghei36>