[Elecraft] Rear Mike Jack Question
Nr4c
nr4c at widomaker.com
Sun Aug 23 23:08:18 EDT 2020
A CM-500 does not need RPH bias mic settings it is a high output element and RPL bias will do fine with mic gain beteeen 10-20 (I use 17).
Sent from my iPhone
...nr4c. bill
> On Aug 23, 2020, at 1:19 PM, Dave Erickson <radio at disseminator.net> wrote:
>
> This just happened to me. I heard a screeching whine when hitting transmit in ft8, turns out the recent update reset all my sound assignments.
>
> 73
>
>> On 8/23/2020 11:01 AM, Buck wrote:
>> I would suspect a Windoze update scrambled your sound assignments. Go back and check all your settings.
>>
>> k4ia, Buck
>> K3s# 11497
>> Honor Roll 8B DXCC
>> EasyWayHamBooks.com
>>
>>> On 8/23/2020 11:56 AM, N4ZR wrote:
>>> Recently, I began trying to use the rear microphone jack on my K3 with my Yamaha boom mike, instead of using a stand-alone USB sound card and feeding the signal to the LIN IN jack. This worked fine for a couple of weeks, but today when I tried it, I got very loud white noise driving my radio and amp essentially to full scale. I have MIC SEL set to RPH BIAS, which has worked in the past. Any MIC gain setting over 7 drives the amp to full output. When I pull the mike plug out of the jack, the problem goes away.
>>>
>>> Have I inadvertently messed up another setting, or perhaps a failure in the mike?
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to radio at disseminator.net
>
> --
> Dave Erickson
> k0dom
> 73
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com
More information about the Elecraft
mailing list