[Elecraft] ERR TXG No Power Output

[Martin Sole]

My first thought would be that if re-seating TMP connectors does not do 
it then possibly one of the 0.1uF decoupling capacitors on the K-REF3 
board. Had that on 2 radios now and on one of them twice.

What is the serial number of your K3?
On both of the problem radios I've had this happen almost exactly the 
same, fine one minute gone the next, both radios were sub 500 S/N's so 
getting on a bit.

Regards
Martin, HS0ZED


On 22/8/63 18:54, Jim McCook wrote:
> Pete, the problem occurs with the K-3 connected directly to a dummy 
> load or various antennas.   Power is read on K3 and Bird wattmeter.
> Mike, I'll try reseating all TMP connectors if there is no magic bullet.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hs0zed at gmail.com