[Elecraft] Digital Mode Drive Setting Issues on K3S

[Nr4c]

Reduce the level of the USB CODEK in Windows to about 30%. This will give you finer control with the Lin In control. 

Sent from my iPhone
...nr4c. bill


> On Aug 20, 2020, at 9:27 PM, Macka Murrah via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> I am trying to get my K3S set up for Winlink using the Vara digital modem for proper ALC operation.  When I set the drive using either the Windows sound card slider, the Vara modem slider, or the Mic drive, I get no bars as I turn the drive up from zero and suddenly I get 6 bars with the 6th and sometimes 5th bars flashing,.  I do not see a progression from 1-2-3 bars, etc. until I reach the desired 4 bars with the 5th bar flickering. I have a similar issue setting the drive for FT8. Why can’t I get a smooth progression from no bars tp 4-5 as I incense the drive?  I seem to remember no having this issue some time ago.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com