[Elecraft] Lightning protection.
Byron Servies
byron at n6nul.org
Mon Aug 17 18:40:57 EDT 2020
FYI,
Corning makes an integrated USB/fiber -> fiber/usb solution:
https://www.corning.com/optical-cables-by-corning/worldwide/en/products/usb-optical-cables.html
73, Byron N6NUL
On Mon, Aug 17, 2020 at 9:11 AM Barry Baines via Elecraft
<elecraft at mailman.qth.net> wrote:
>
> Dave:
>
> > On Aug 15, 2020, at 11:05 AM, Dave Baxter via Elecraft <elecraft at mailman.qth.net> wrote:
> >
> > FYI.
> >
> > RS232 (and other serial link type) LEMP (Lightning Electro Magnetic Pulse)
> > surge protectors are available from several vendors, and not that
> > expensive, compared to the cost of a rig, or top range PC.
> >
> > Often wonder why (other than expence) fibre optic links are not used. CAT
> > & audio over a LAN or USB FO link?
> >
> > Would help general EMC issues too.
>
> Following a lightning incident back in 2014, I followed the adage that Al, N4ZZ put out about using Fiber in the shack for ethernet connections. I have four fiber lines from the house to the garage/hamshack that replaced two ethernet lines. Each is 111. ft long. Each line carries a grouping of connections such as one for my Flex system, one for my Electraft system, one for Broadcastify and data collection, and the fourth for ‘all other’. I have my network in the shack segregated so that if the Flex system goes out the Elecraft system will hopefully continue. Given that I primarily operate remotely, redundancy in amateur operations is critical because it may be 4-6 weeks between visits to the ham shack that is over 1,280 miles away.
>
> I also use fiber as a ‘fire break’ between network switches in the shack and high value equipment such as transceivers.
>
> I haven’t found suitable fiber media converters for RS232 or USB. I still have Telco and CATV coax running between the house and shack; it would be nice to find a fiber media converter for those lines as well. I will probably remove them given they are not currently in use.
>
>
>
> FWIW,
>
> Barry Baines, WD4ASW
> (Currently in Boston/Roslindale, MA)
>
>
> >
> > Dave G0WBX
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to bbaines at mac.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to byron at n6nul.org
--
- Northern California Contest Club
- CU in the Cal QSO Party 3-4 Oct 2020
- www.cqp.org
More information about the Elecraft
mailing list