[Elecraft] OT construction question

[Victor Rosenthal 4X6GP]

Here is my Power Pole holder. It is just a piece of 1.6mm thick aluminum 
with a notch in it. The notch is sized precisely to fit the groove in 
the sides of the APP. I just drilled a few holes and filed it to size. 
Then you make a slightly larger rectangular hole in the panel that will 
pass the back part of the APP. All that's left is the mounting holes.

Here's a picture (link is case-sensitive):
<https://www.qsl.net/k2vco/APP_Holder.jpg>

73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
.
On 17/08/2020 12:45, Paul Gedge wrote:
> Victor,
> 
> I’ve never considered fabricating such a solution.  Wonderful idea!
> 
> Thank you!!
> 
> Love to see any photo of the solution.
> 
> 
> Best Regards,
> KF7WCY
> Paul Gedge
> Salt Lake City, Utah
> USA
> 
> 
> Begin forwarded message:
> 
> *From:* Victor Rosenthal 4X6GP <k2vco.vic at gmail.com>
> *Date:* August 17, 2020 at 1:36:59 AM MDT
> *To:* Elecraft Reflector <elecraft at mailman.qth.net>
> *Subject:* *Re:  [Elecraft] OT construction question*
> 
> Never mind, I made my own metal dohickey! Just a piece of 1.6mm 
> aluminum with a notch in it. Very cool, if I do say so myself!
> 
> 73,
> Victor, 4X6GP
> Rehovot, Israel
> Formerly K2VCO
> CWops no. 5
> http://www.qsl.net/k2vco/
> 
> On 17-Aug-2020 09:56, Victor Rosenthal 4X6GP wrote:
>> What do you think about epoxy-ing an Anderson Power Pole connector
>> into a 3mm aluminum panel?
>> Would it be durable?
>> I know there is a metal dohickey to mount an APP to a panel, but it's
>> not available here and I don't want to wait weeks.
>> Or should I just go with a grommet and pigtail?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pgedge at gedge.org