[Elecraft] K3 boards

[Eric Swartz]

Hi Scott,

Keith mis-spoke on this.  We certainly are not stopping support and repairs
for the K3 and K3S.

What is happening is that we are pivoting from board swaps to component
level repairs on many K3 and K3S boards.  Also, we will still be building
boards for these radios that can be sold for upgrades and repair swap outs
on a case by case, lot basis, based on demand. (There is a sign up list
for upgrade / spare board requests on our web page for the upgrade boards.)

73,
Eric
*elecraft.com <http://elecraft.com>*


On Sat, Aug 15, 2020 at 12:00 PM NE9U - Scott Jasper <skjasper at att.net>
wrote:

> What does this mean?  K3's will no longer be able to be repaired?
> Obsolete???
>
> "Spare K3 board supplies are low or gone."
>
> Besides the most likely Comm Port, then obvious Antenna, I have seen
> lightning come in other things connected to the K3, like;
> DC power cord, ground, Paddle/Key, Key-Out to Amp etc.
> '73
> Keith WE6R, Elecraft K3 Tech
>
>
> ⁣Scott - NE9U
>
> Sent from my Cray-1
>
> skjasper73 at gmail.com
> skjasper at att.net
> ne9u at arrl.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swartz at elecraft.com