[Elecraft] KX3 PX3 desktop stand

[stephen shearer]

Nice install.
I took the GEM mounts and plywood one more step.  I used a ~12" round 
3/4" plywood disk and mounted three RAM mounts; 
https://www.rammount.com/ .  KX3, PX3 and Plastic "box".  The box can 
hold audio ADC and CAT control or for picnic table OP's, and antenna.  I 
am able to adjust KX3/PX3 angle and position for best OP...

73, steve WB3LGC

On 8/9/20 7:56 PM, Mark Goldberg wrote:
> Gem's Products KX3 and PX3 mounts and some plywood works for me. See
> the bottom of this page:
> 
> https://sites.google.com/site/marksmobilehamstation/
> 
> 73,
> 
> Mark
> W7MLG
> 
> On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft
> <elecraft at mailman.qth.net> wrote:
>>
>> Any recommendation for a desktop stand for a KX3 and PX3 that would keep
>> both at proper angle and manage the wires?
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to marklgoldberg at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to sm.shearer.01 at gmail.com
> .
>