[Elecraft] Question on K3S and Winlink Express

[Lyn Norstad]

Brett -

I'm not Bob ... but I might be able to help with your Winlink issues.

I am quite active on the various P2P modes in Winlink express and have
formed a nationwide group to become proficient in handling P2P message
traffic in the case of a "grid down" emergency (no internet, no cells, no
repeaters, no power).

You may be too close to the gateway station, especially with a vertical
antenna (NVIS might even be marginal at 5 miles).

If you'd like some other stations to try, at a greater distant and in P2P
mode, let me know.

73
Lyn, W0LEN
 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of MaverickNH
Sent: Sunday, August 02, 2020 8:59 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Question on K3S and Winlink Express

Any luck with that Bob? I've been using Winlink on Packet VHF from a Kenwood
TM-D710G but wanted to try  80m with my K3S. I'm to the point where Ardop is
trying to connect to a local gateway about 5mi away from a 43ft vertical
with remote ATU at base at 50W. No connection yet...

I'm able to RX/TX on WSJT-X so figure my configuration should work, but
perhaps I need to tweak it for Ardop?

BRET/N4SRN



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________