[Elecraft] K2 Looking for a KPA 100 amplifier

[Dave Van Wallaghen]

Mike,

The amp will fit just fine with your current configuration. Although, the 
KAT2 and KIO2 boards will stay with the original top cover. The KPA100 
includes the KIO2 circuitry. If you need an ATU for use with the KPA100, 
then you will want a KAT100 ATU or other brand that can handle 100+ watts.

Hope this answers your question.

73,
Dave, W8FGU
On April 27, 2020 14:18:04 NJMike <mikekopacki at gmail.com> wrote:

> I built K2 #4619 some years ago. Now I am considering adding the KPA 100
> amplifier.  When I bought and built the K2, I also built and installed the
> following option3:
>
> KAT2 automatic antenna tuner
> KSB2 SSB adapter
> KDSP2 DSP filter and internal clock
> KIO2 AUX I/O module
> KNB2 noise blanker
> K160RX 160 meter module
> MH2 microphone
>
> On the technical side, I need to know if the amp can be installed after
> installing all these options.
>
> On the purchasing side, I guess my options are purchasing from Elecraft for
> $650 (which I am sure is worth the price), or buying one from someone who
> bought one but never built it.  I am retired now so I'm trying to spend as
> little as I can.
>
> Please let me know if you have one that you'll sell, and if you know the
> answer to the first question.
>
> Thanks!
> Mike NJ2OM
>
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at w8fgu.com