[Elecraft] USB Noise core gets hot when operating FT*?

donovanf at starpower.net donovanf at starpower.net
Mon Apr 20 13:54:14 EDT 2020


Definitely 


You can prove it to yourself by connecting a dummy load to your K3 


73 
Frank 
W3LPL 

----- Original Message -----

From: AE4PB at carolinaheli.com 
To: donovanf at starpower.net, elecraft at mailman.qth.net 
Sent: Monday, April 20, 2020 5:52:57 PM 
Subject: RE: [Elecraft] USB Noise core gets hot when operating FT*? 



Are you saying that’s what’s causing the ferrite core on the USB cable to heat up? 


Jerry Moore 
Cell: 803-431-1870 



From: donovanf at starpower.net <donovanf at starpower.net> 
Sent: Monday, April 20, 2020 1:52 PM 
To: elecraft at mailman.qth.net 
Subject: Re: [Elecraft] USB Noise core gets hot when operating FT*? 


You're safe, but obviously your K3 isn't... 
----- Original Message -----


From: AE4PB at carolinaheli.com 
To: donovanf at starpower.net , AE4PB at carolinaheli.com 
Cc: elecraft at mailman.qth.net 
Sent: Monday, April 20, 2020 5:40:26 PM 
Subject: RE: [Elecraft] USB Noise core gets hot when operating FT*? 
I’m not sure, but, it’s a good point. I’m only running 50Watts. 



From: donovanf at starpower.net < donovanf at starpower.net > 
Sent: Monday, April 20, 2020 1:36 PM 
To: AE4PB at carolinaheli.com 
Cc: elecraft at mailman.qth.net 
Subject: Re: [Elecraft] USB Noise core gets hot when operating FT*? 


With your antenna that close, are you sure you're not exceeding human 

body RF exposure requirements? 



73 

Frank 

W3LPL 



From: AE4PB at carolinaheli.com 
To: elecraft at mailman.qth.net 
Sent: Sunday, April 19, 2020 12:46:55 AM 
Subject: [Elecraft] USB Noise core gets hot when operating FT*? 

Today I was working a digital mode (FT8) and lost connection to the radio. I 
cycled power with no success. On reseating the USB connection at the 
computer I felt the ferrite core was HOT. The cable didn't feel hot at all. 
I'm using a 20m hamstick in the office as my antenna. I shut everything down 
to cool off. Afterwards everything seems to be working correctly. 

Any ideas? 

Tnx and 73 

Jerry D. Moore 

AE4PB 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donovanf at starpower.net 




More information about the Elecraft mailing list