[Elecraft] KX2 sluggish/intermittent VFO display

[Heinz Baertschi]

Thanks Tom, interesting to know.

*When troubleshooting it would still be of great help to know how the KX2
encoder is connected to the main bord - plugged in or soldered?*

73,
Heinz HB9BCB



Tommy wrote
>  I have seen the same on my KX2, while dialing it seems to freeze at 
> times for a second or so at a time. Even after being on only a few 
> minutes. Kind of annoying but not too worrying to me. At least for now. 
> Serial # 01927
> 
> 73 de Tom KB2SMS
> 
> 
> On 4/18/20 10:44 AM, Heinz Baertschi wrote:
>> A colleague's KX2 has had the following symptom several times after
>> approx. 2
>> hours of portable operation at ambient temperatures of approx. 20-25 °C
>> and
>> locations in the shade or in the sun:
>>
>> Sluggish and intermittent VFO display when dialling to a new frequency.
>> The
>> selected frequency then appeared correctly after approx. 0.5-1.5 seconds.
>>
>> Has anyone noticed the same symptom and if so, what had to be done to fix
>> it?
>>
>> Any help would be appreciated?
>>
>> 73 tks,
>> Heinz HB9BCB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble





--
Sent from: http://elecraft.365791.n2.nabble.com/