[Elecraft] KX3 WSJTX Split

[Adrian]

I just made the contact with Mas JA3FYC, just now , thanks to Carl

http://vk4tux.duckdns.org/KX3/1908_1.jpg

http://vk4tux.duckdns.org/KX3/1908_2.jpg


On 17/4/20 4:28 am, Adrian wrote:
> The answer for this (Use OmniRig as wsjtx radio rig choice, and setup
> OmniRig for KX3) came from Carl N4PY ;
>
> "Carl, absolutely brilliant thankyou. This is the real answer I have been
> looking for since discovering the issue,
>
> and I have just tested split function here now all ok, retaining the B vfo
> freq without cat change.
>
> I never even realised that OmniRig was in the list until you mentioned it
> here.
>
>
> Thankyou very much for solving the issue.
>
>
> regards
>
>
> Adrian ... vk4tux
>
> On 17/4/20 1:56 am, Carl Moreschi wrote:
>> You can use OmniRig as the radio type and then set OmniRig for the K3.
>> That will work.
>>
>> Carl Moreschi N4PY
>> 127 River Moss Way
>> Hertford, NC 27944
>> www.n4py.com   "
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of vk4tux
> Sent: Saturday, 11 April 2020 7:43 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KX3 WSJTX Split
>
> I recieved this email from Japan ;
>
> "I decode you FT8 on 1840kHz that I send the JPG file to you.
> JAs are working split RX 1840kHz and TX 1908kHz.
> Please CQ JA on 1840kHz and RX 1908kHz if possible.
>
> The 160m frequency in Japan,
>    1810-1825kHz and 1907.5-1912.5kHz
>
> DATE   Sunrise (GMT) in JA3
> Apr 07:  20:34Z
>       
> We hope to see you on 160m soon.
> TKS 73
> Mas JA3FYC"
>
> I tried this, however on enable TX  the VFO A and B become the same
> frequency on TX from wsjtx.
> I have cat ptt and cat control enabled, with rig split set.
>
> If I use the mic to key etc, the split remains, however something about wstx
> causes the VFO's to match on TX losing the split        ?
>
> vk4tux
>
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to vk4tux at gmail.com
>
>