[Elecraft] Power can be set only to 12W on 100W version

[Bill Stravinsky]

 In the event you have a very old K3 (serial number approx 3000 or earlier) you might need to replace some plugs on the final amp. As has beensuggested the first thing to do would be to contact Elecraft.
Good Luck.
BillK3WJV

    On Sunday, April 12, 2020, 2:11:23 PM EDT, Nr4c <nr4c at widomaker.com> wrote:  
 
 Contact Elecraft customer service. 

Sent from my iPhone
...nr4c. bill


> On Apr 12, 2020, at 12:55 PM, Erwin Witt - DK5EW <dk5ew at darc.de> wrote:
> 
> 
> Hi all,
> 
> suddenly I can set the power of my K3/100W version with the power knob on
> shortwave only to max 12W and on 6m only to 8W.
> 
> That all happened when I was operating on shortwave the K3 got's suddenly
> very hot. Hope that the finals did not shot.
> I checked the KPA3 setting it is on "nor".
> 
> Any help on that ?
> 
> 73's Erwin/DK5EW
> 
> PS: now Text email not html hope it arrives
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k3wjv at yahoo.com